- 黄冈 [切换城市]
-
热线电话：0571-85856962
-
安装指南： 北极熊的安装与一般的一体式水冷并无多大区别，但是站在发挥效能的角度，以下经过检验的安装方式可供参考： Step 1：根据自己的机箱情况决定风道的安排（包括风扇的正反，风扇上带有标贴的一面为出风面），以下几种风道可供参考： Step 2：决定风道之后，先把冷排和风扇固定在所需的位置（请先确定管子够长），如果风扇所在的一面紧贴机箱，用M3*30长螺丝，如果没有风扇的冷排所在一面紧贴机箱，用M3*6短螺丝： Step 3：固定好冷排之后，将北极熊的CPU冷头装上合适的扣具，并揭掉冷头底部保护膜，涂抹好硅脂安装到主板上。 请根据自己的平台选择扣具，另外请注意每种不同平台所用的螺丝是不同的，仅有Intel 115x平台需要安装背板，AMD和Intel 2011/2011-3只需借助主板原装背板即可。 提醒：扣具可以从两个方向安装，请配合自己的冷排安装位置和走管需要来选择： Step 4：把两把风扇的接口用标配分线器合成一个，然后风扇插CPU FAN接口，水泵接口看情况接到CPU-OPT、W_PUMP或者其他任意主板风扇接口： 完事，Enjoy~开始你的水冷之旅吧~~是不是很简单。
本产品的原厂电子版说明书（PDF格式，全英文）可到以下链接下载，这是灯闪铃响水冷集从官方网站摘录整理，不保证是新版本，但有助于帮助您进一步了解产品的安装和细节：
请注意，如果您直接点击后遇到了乱码，请下载后使用Adobe Acrobat Reader打开查看：
→点击这里查看原厂电子版说明书← 下载提取码：ltyYvl
→点击这里查看原厂电子版参数规格表 ← 下载提取码：zVjKSJ
下图为官方给出的尺寸图，供有需要的朋友参考：
Eisbaer冷排部分的3D模型（STP格式）：→点击这里下载← 下载提取码：FH0Hdn
↓以下为取自官方网站的英文说明（以Eisbaer 360为例），供各位玩家参考：
Product Information
With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it is quieter and more powerful than the average AIO solution.
The individual components:
Radiator
Alphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.
Hoses
The flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fitted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.
Quick-lock closure
The “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.
Fans
The “Eiswind” fans were developed specially for radiators and generate a high static pressure in order to push cool air through the fan blades. Both fans can be regulated with PWM to anywhere in an enormous range from 550 to 1700 RPM. A PWM Y-adapter is included with the “Eisbaer” so that both fans can be controlled by the motherboard or a separate fan control with a PWM connection.
Connectors
All connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart.
All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight.
With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.
Pumps
The basis of the pumps is the Alphacool DC-LT Ceramic Ultra Low Noise, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed.
The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently.
Technical Details:
Pump (Alphacool DC-LT 2600 Ultra low noise Ceramic):
Speed: 2600 RPM
Voltage: 7-13.5V DC
Power consumption: 4W
Maximum flow rate: 70L/h
Maximum head: 0.85m
Fan (Eiswind 12):
Bearing: sleeve bearing
Voltage: 12V
Power connection: 4-pin PWM
Rated speed: 550-1700 (+/- 10%)
Airflow: 63.85 cfm / 108 m3/h
Static pressure: 1.66 mmH20
Volume: 29 dB(A)
Scope of Delivery:
1x Alphacool Eisbaer 360 CPU - Black
3x Eiswind Fan
1x Intel Backplate
1x Intel bracket
1x AMD bracket
PWM Adapter
Mounting material
1x Thermal paste
Notice for expansion:
Please take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.
浙公网安备 33011002014639号 浙ICP备11030581号-2 